For Slow or Sluggish Drain Fields/Septic Tanks:
Start with 3 gallons of product. Use 1 gallon of the product via the toilet, sink or drain closest to the septic tank outlet. Next, apply 1 gallon of product into the drain field soil directly. After 1 week add another 1 gallon. Flush freely with water to distribute it throughout the septic system drain field.
For Drain Field and Leach Field Maintenance:
Use 1 gallon every 6 months via the toilet or nearest drain closest to the septic tank.
Restoring Failed Drain Fields or Leach Systems:
Start with 5 gallons of product. Apply a minimum of 3-4 gallons of product directly to the drain field soil. Apply the final 1-2 gallons via the distribution box/cleanout or septic tank opening. For waterlogged systems, try to drain off as much excess water as possible before treatment. Use a hose and add 40-80 gallons of water to the distribution box with the product to ensure it makes it through the drain fields' entire system. If you can not access the distribution or "D-Box", it may be necessary to add additional products via the toilet or sink.
The directions may need to be repeated for seriously slow or completely “locked” soil, especially clay-type soils.
Septic tanks can be hazardous as noxious gases can form in the septic tank. Opening the tank may release these gases, and precautions should be taken to ensure you do not breathe these gases. If in doubt, have a professional service your tank with our products.